Gallo Tech GTStarter-2 GTS-2 Kullanım ve Kurulum Kılavuzu - Sayfa 5
Uzaktan Çalıştırıcı Gallo Tech GTStarter-2 GTS-2 için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. Gallo Tech GTStarter-2 GTS-2 15 sayfaları. Keyless rfid push button start & security system
Sayfayı Yazdır1.3 "PUSH START STOP" BUTTON OPERATION
Turning ACC, IGN1, IGN2 ON/OFF and Starting the Engine:
When in Disarm mode and the RFID key FOB is in detection range.
To Turn ACC ON/OFF
Press
"PUSH START STOP"
button once again then release, ACC will turn OFF.
To Turn ACC, IGN 1and IGN 2 ON/OFF with no engine start.
Press "PUSH START STOP" button and hold for 1.5 sec. without pressing the brake/clutch peddle, ACC,
IGN 1 and IGN2 will turn ON and the engine will not start. To turn ACC, IGN1 and IGN2 OFF, press
and hold for 1.5 sec. "PUSH START STOP" button, or when the RFID key FOB is taken out of range,
ACC, IGN1 and IGN2 will turn OFF
© Copyright Gallo Technologies. All Right Reserved
button once then release, ACC will turn ON; press
OFF
automatically.
Press button for 1.5 Sec
No brake or clutch
OFF
Press button once
then release it
Press button once
then release.
Press button for 1.5 Sec
- 5 -
"PUSH START STOP"
ACC
ON
ACC, Ign1
& IGN2
ON
Rev. V8.2- 20212