Highway Safety Group EA401 Kullanıcı Kılavuzu - Sayfa 7
Güvenlik Sistemi Highway Safety Group EA401 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Highway Safety Group EA401 12 sayfaları. Driver fatigue eye alert system
Ayrıca Highway Safety Group EA401 için: Kullanıcı Kılavuzu (12 sayfalar)
Sayfayı YazdırVI. Installation
To install on the dashboard: Clean the mounting surface in your car.
Remove the round magnet from the box, remove the paper protector
and stick to the top surface of the dashboard. The EA401 has a metal
base. Connect the power cord to car cigarette lighter. The EA401 will
begin to work after being powered on, now you can adjust the
position according to the state of the green light facing you. After the
green light is on, move your face around a small amount, if the green
light stays on, that means the installation is good.
The USB type wire can connect directly to a GPS or GPRS system. The
output signal is a 3.3 volt logic signal that asserts when the alarm trips.
The secondary power cord can wire directly to 12V power.
The angle between the driver and the camera should be less than 20
degrees.
Highway Safety Group Page 7
Version 11.9.16