highwood SEQUOIA PROFESSIONAL CM-CHRSQC2 Montaj Kılavuzu
İç Mekan Mobilyaları highwood SEQUOIA PROFESSIONAL CM-CHRSQC2 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. highwood SEQUOIA PROFESSIONAL CM-CHRSQC2 2 sayfaları. Counter height muskoka chair
Sayfayı Yazdır
Sequoia Professional
Counter Height Muskoka Chair
Assembly Guide
BACK
1) Insert (1) "A" Bolt into Lower Hole on Each Side to
Attach Seat to Back. Make Sure the Back is Fully Upright.
Make Bolts Snug, but Do Not Overtighten.
NOTE: Arm Goes on
Top of Back Support
2) With the Chair Laying on its Left Side, Attach
the Right Leg to the Seat Using (3) "A" Bolts.
SEQUOIA
PROFESSIONAL
by
highwood
A
SEAT
A
For information on Care and Cleaning or to register your
PROFESSIONAL
www.highwood-usa.com.
A
RIGHT LEG
A
SEAT
product by highwood , please visit
HARDWARE
1/4"-20 x 1-3/4"
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
INCLUDED TOOLS
5/32" HEX KEY
SEQUOIA
x18
CM-CHRSQC2
03.05.19
PAGE 1 OF 2