Dynex DX-CR212 Hızlı Kurulum Kılavuzu
Kart Okuyucu Dynex DX-CR212 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Dynex DX-CR212 2 sayfaları. Lecteur de carte mémoire 11-en-1
Ayrıca Dynex DX-CR212 için: Manuel (6 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Sıkça Sorulan Sorular (5 sayfalar), (İngilizce) Kullanıcı Kılavuzu (13 sayfalar), (Fransızca) Manual De L'utilisateur (13 sayfalar)
Sayfayı Yazdır
DX-CR212
11-in-1 Memory Card Reader / Lecteur de carte mémoire
11-en-1 / Lector de tarjetas de memoria 11 en 1
Data LED indicator
Indicates when a slot is reading from or writing to a card
DEL de transfert de données
Indique qu'une carte est en lecture ou écriture dans la fente.
Indicador LED de datos
Indica cuando la ranura está leyendo o grabando la tarjeta.
microSD/microSDHC
MMC/SD/SDHC/SDXC/MMCplus
Note: Insert cards into this slot with the label facing DOWN.
Remarque : Les cartes doivent être insérées dans cette
USB cable jack
fente avec l'étiquette tournée vers LE BAS.
Prise pour câble USB
Nota: Inserte las tarjetas en esta ranura con la etiqueta
Toma para cable USB
hacia ABAJO.
MemoryStick, MS PRO, MS Duo,
MS PRO Duo, MS PRO-HG Duo
QUICK SETUP GUIDE / GUIDE D'INSTALLATION RAPIDE /
GUÍA DE INSTALACIÓN RÁPIDA
Package contents
• Memory Card Reader
• Quick Setup Guide
System requirements
• Windows XP, Windows Vista, Windows 7, or Mac OS 10.4.x or higher.
Features
• Easily transfer music, photos, video, and other files between your computer and a
digital camera, PDA, cell phone, or MP3 player.
• Supports SD, SDHC, SDXC, microSD, microSDHC, MMC, and MMCplus cards
• Supports MS/MS-Duo/MS-Pro/MS-Pro Duo cards
• Plug & Play: no drivers required
• USB 2.0 compatible
To access a memory card using Windows:
1 Plug the USB cable into an open USB port on your computer. Your computer will
install the driver automatically.
2 Insert a card into the appropriate slot. The blue data LED lights.
Caution: Insert the cards into the correct slot and in the correct direction. Failure
to do so may result in damage to your card and/or card reader.
Note: Insert cards into the microSD and MS slot label side UP. Cards inserted into
the SD slot must be label side DOWN.
3 Click Start, then click My Computer/Computer. Double-click the drive for the card
reader.
4 To access files and folders on the memory card, use normal Windows procedures
for opening, copying, pasting, or deleting files and folders.
5 When you are done working with the files on the memory card, right-click the
memory card drive in My Computer/Computer, then select Eject. The blue data
LED on the memory card reader turns off after the card is ejected. Remove the
card from the slot.
Caution: Do not remove memory cards while the blue data LED on the reader is
flashing. Doing so may result in loss of data or damage to your memory card.
To access a memory card using Macintosh OS 10.4.x or higher:
1 Plug the USB cable into an open USB port on your Mac.
2 Insert a card into the appropriate slot. The blue data LED lights and a new drive
icon appears on the desktop.
Caution: Insert the cards into the correct slot and in the correct direction. Failure
to do so may result in damage to your card or card reader.
Note: Insert cards into the microSD and MS slot label side UP. Cards inserted into
the SD slot must be label side DOWN.
3 When you have finished working with the files on the memory card, drag the disk
icon to the Eject icon or click the memory card icon on the desktop and select
Eject. Then remove the card from the slot.
Caution: Do not remove memory cards while the blue data LED on the reader is
flashing. Doing so may result in loss of data or damage to your memory card.
Troubleshooting
Visit www.dynexproducts.com for details.
WE ARE GOING GREEN!
A copy of your User Guide is not provided
in the box but is available online.
Go to www.dynexproducts.com, click
Support & Service. Enter your model number
in the Search field, then press Enter.
Click Support/Downloads.
Legal notices
FCC Information
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003;
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
One-year limited warranty
Visit www.dynexproducts.com for details.
For additional information, see the online User Guide.
Contact Dynex
For customer service call 1-800-305-2204
www.dynexproducts.com
© 2012 BBY Solutions, Inc. All Rights Reserved. DYNEX is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
Contenu de l'emballage
• Lecteur de carte mémoire
• Guide d'installation rapide
Configuration système requise
• Windows XP, Windows Vista, Windows 7 ou Mac OS 10.4.x ou supérieur
Caractéristiques
• Facilite le transfert de musique, photos, vidéo et d'autres fichiers entre un
ordinateur et un appareil photo numérique, un ANP, un téléphone cellulaire ou
un lecteur MP3.
• Compatible avec les cartes SD, SDHC, SDXC, microSD, microSDHC, MMC et MMCplus
• Compatible avec les cartes MS/MS-Duo/MS-Pro/MS-Pro Duo
• Prêt à l'emploi : aucun pilote requis
• Compatible USB 2.0
Pour accéder à une carte mémoire sous Windows :
1 Connecter le câble USB à un port USB disponible de l'ordinateur. L'ordinateur
installera le pilote automatiquement.
2 Insérer une carte dans la fente appropriée. La DEL de données bleue s'allume.
Attention : Les cartes doivent être insérées dans la fente appropriée et dans le
bon sens. Si ce n'est pas le cas, la carte ou le lecteur pourraient être endommagés.
Remarque : Insérer les cartes dans la fente pour microSD et MS avec l'étiquette
tournée vers le HAUT. Insérer les cartes dans la fente pour SD avec l'étiquette
tournée vers le BAS.
3 Cliquer sur Start (Démarrer), puis sur My Computer/Computer (Poste de travail/
Ordinateur). Double-cliquer sur le lecteur correspondant au lecteur de cartes.
4 Pour accéder aux fichiers et dossiers de la carte mémoire, utiliser les procédures
normales de Windows pour ouvrir, copier, coller ou supprimer des fichiers et des
dossiers.
5 Quand les travaux sur les fichiers de la carte mémoire sont terminés, cliquer avec
le bouton droit de la souris sur le lecteur de carte mémoire dans My
Computer/Computer (Poste de travail/Ordinateur), puis sélectionner Eject
(Éjecter). La DEL témoin du lecteur de cartes mémoire s'éteint dès que la carte est
éjectée. Retirer la carte de la fente.
Attention : Ne pas retirer les cartes mémoire tant que la DEL des données bleue
du lecteur clignote. Sinon, une perte de données peut en résulter et la carte
mémoire pourrait être endommagée.