Coral Coast CWR036-2 Hızlı Başlangıç Kılavuzu - Sayfa 4

İç Mekan Mobilyaları Coral Coast CWR036-2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Coral Coast CWR036-2 4 sayfaları. Paradise cove retro metal rocker

Sayfayı Yazdır
STEP-BY-STEP ASSEMBLY:
STEP 3
Attach the seat back (A) to side frames, on both sides with bolt (2) on the outside, washer (4) and
nut (5) on the inside. Assemble as shown.
STEP 4
Carefully line up holes in arm cover (F) with holes on chair frames. Using a quick downward push,
snap cover over frame. Attach arm holder (F) to each side frame with the bolt (3).
The washer (4) and round top nut (6) should be used underneath the arm cover. Assemble as shown.
IMPORTANT:
Exposure to harsh weather conditions may encourage rusting of the steel metal components.
Protection from these conditions is recommended.
BE SURE ALL FASTENERS ARE FULLY TIGHTEN BEFORE SITTING ON ROCKER.
A) Back
2
C
3
F)
4
6
C)
2
4
5
D
3
F)
4
6
D)
4/4