Dynex DX-DRTVM102 Kullanıcı Kılavuzu - Sayfa 6

TV Montajı Dynex DX-DRTVM102 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dynex DX-DRTVM102 16 sayfaları. Support de montage mural de taille moyenne ultra-mince avec inclinaison de - 5° optionnelle
Ayrıca Dynex DX-DRTVM102 için: (İngilizce) Manuel Montaj Talimatları (16 sayfalar), (Fransızca) Instructions De Montage Manual (16 sayfalar)

Sayfayı Yazdır

Step 1:

Assembly instructions

Adjust the tilt

Note: The tilt on the left TV bracket (02) and right TV bracket (03) must be the same.

Use a Phillips screwdriver to remove the two tilt screws (S) from the outside edges of each TV bracket (02

and 03).

To tilt the TV forward by 5°, push the tilt brackets on the left TV bracket (02) and right TV bracket (03) down.

To keep the TV completely vertical, push tilt brackets on the left TV bracket (02) and right TV bracket (03) up.

Re-insert two tilt screws (S) into each TV brackets (02 and 03), then tighten the screws.

Caution: Do not over tighten the screws.

Option 1: Mount tilted -5°

Option 2: Mount not tilted

You'll need:

Phillips screwdriver

Tilt bracket

Need help? Call 800-305-2204

DX-DRTVM102