AGS Parksafe Control Panel Kurulum ve Kullanım Kılavuzu - Sayfa 13

Kontrolör AGS Parksafe Control Panel için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. AGS Parksafe Control Panel 16 sayfaları. Ventilation control panel
Ayrıca AGS Parksafe Control Panel için: Kurulum ve Kullanım Kılavuzu (16 sayfalar), Kurulum Operasyon ve Bakım (16 sayfalar), Kurulum, Çalıştırma ve Bakım Kılavuzu (20 sayfalar)

Installation & Operation Manual

General Maintenance

Keep your Parksafe system in good working order follow these basic principles;

Remove any dust/debris from the outer enclosure regularly using a slightly damp cloth.



Never use detergents or solvents to clean your gas detection devices.



Never spray air fresheners, hair spray, paint or other aerosols near devices.



Never paint devices. Paint will seal vents and interfere with the device.



It is recommended that detectors are inspected and serviced at least annually from the date of

installation for optimum performance and protection due to sensitivity drifts!

High concentrations of alcohol found in many products may damage, deteriorate or affect the gas

sensor such as; wine; deodorants; stain removers; thinners etc. Other gases and substances to

avoid are; Corrosives (i.e. chlorine & hydrogen chloride); Alkali metals; Basic or acidic compounds;

Silicones; Tetraethyl lead; Halogens and halogenated compounds!

This message will appear on the home screen and indicates that a gas sensor module has reached

either its expected operational lifecycle (EOL) or that the detector(s) require its periodic service

check. Press the 'GAS DETECTION' button on screen to identify the affected detector(s) and status.

No gas levels will be displayed for that detector during this time.

The expected operational life of a gas sensor module will depend on the type of gas your detector

is targeting and may vary depending on environmental conditions.

When a gas detector displays the 'End of Life' message contact your supplier immediately.

It is important to maintain the gas sensing elements of gas detectors for optimum performance,

protection and security of the system. When the detector displays the 'SERVICE' message contact

your supplier immediately. Parksafe gas detectors will still operate but its sensitivity can be inhibited

by external factors such as, dust; humidity; temperature fluctuations; cleaning products;

contaminants or sensor drift (ageing). All can cause a decline in sensitivity and eventual failure. It is

recommended that detectors are inspected and serviced at least annually from the date of

installation for optimum performance and protection.

Contact your supplier for more information.

AGS Parksafe Panel - IOM Iss: 6 10-20

Parksafe