Galvin Engineering TCS9C150C Kurulum Manüelleri - Sayfa 5

Banyo Armatürleri Galvin Engineering TCS9C150C için çevrimiçi göz atın veya pdf Kurulum Manüelleri indirin. Galvin Engineering TCS9C150C 7 sayfaları. Clinilever cp-bs hospital shower set w/ medi hand shower & 900 ss grab rail

Sayfayı Yazdır

Product Installation Guidelines

5. Fit grab rail into wall mount plate and tighten

lock nut firmly.

7. Cradle Installation

Fit the shower cradle to the grab rail as shown.

Position the cradle as desired then tighten the

cover of the cradle.

Elbow

9. Connect Flange Wall Outlet Elbow

Fit elbow over spigot and secure with grub

screw.

Using 2.5mm hex key supplied, tighten 5mm

grub screw.

Hex Key

6. Screw flange cover to wall mount plate.

Flow Regulator

Spigot

8. Connect Flange Wall Outlet Elbow

Apply thread tape to wall spud. When applying

thread tape or sealant to the wall spud, ensure

the opening is not obscured. Failure to do so

may restrict or block the flow restrictor,

affecting the flow of water.

Remove spigot by loosening grub screw in

elbow.

Fit spigot to wall spud, ensuring the flow

regulator is in place and not damaged when

tightening the spigot.

10. Check Shower for correct operation

and leaks

Connect hose and shower head ensuring the

connection is secured, then turn on water supply.

Check for any leaks.

Document No.: 001.00.10.16

Version 1, 4 November 2022, Page 5 of 7

Grub Screw