hikam A7 Hızlı Başlangıç Kılavuzu - Sayfa 4
Güvenlik Kamerası hikam A7 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. hikam A7 6 sayfaları. Smart home wireless ip-kamera
Ayrıca hikam A7 için: İlk Kurulum İçin Hızlı Kılavuz (10 sayfalar)
Sayfayı Yazdır
Option 2: Launch using cable
Optionally, HiKam A7 can be configured and operated using a LAN cable. If wished, you can switch the
connection from LAN to WLAN later.
- Follow Steps 1, 2 and 3 of Preparation (see above).
- Connect the camera to the router using a LAN cable. Make sure the router is connected to the internet and
DHCP is activated.
- Open app and wait a few seconds. Camera will be detected automatically
the camera manually
(see pictures 8, 9 and 10)
note this number and keep it for future use.
Picture 7
Picture 8
- You are asked to name the camera and to enter the initial camera password which is 123.
- You will then be asked to enter a new password, consisting of 6-9 digits. Please do NOT start with "0"
(see picture 12)
- You can now follow the live video stream on your smartphone
- You can now switch from LAN to WLAN or skip this step: My Camera -> Settings -> Network Settings ->
Choose WLAN -> Confirm -> Enter WLAN password
Picture 13
Picture 14
- If the green CHECK behind the WiFi appears, you successfully switched from LAN to WLAN.
18)
Please read the annex for mounting instructions.
Support:
http://support.hi-kam.com
For further instructions, video tutorials, software, data sheets, specs, FAQs.
Guaranteed feedback within 24hrs, often within 4hrs.
. You can find the device ID on the underside of the camera, please
Picture 9
Picture 10
(see pictures 13 to 17)
Picture 15
Picture 16
. If not, you can add
(see picture 7)
Picture 11
Picture 12
(see picture 11)
Picture 17
Picture 18
(see picture