AGS Merlin Kurulum ve Kullanım Kılavuzu - Sayfa 4

Gaz Dedektörleri AGS Merlin için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. AGS Merlin 12 sayfaları. Refrigerant gas detector tft
Ayrıca AGS Merlin için: Kullanım ve Kurulum Kılavuzu (5 sayfalar), Kullanım ve Kurulum Kılavuzu (6 sayfalar), Kurulum ve Çalıştırma Talimatları (16 sayfalar)

Installation & Operation Manual

Typical Installation Arrangement

1. POWER / LINE IN

110-120V AC Power should be supplied to the [POWER / LINE IN] terminal and fused at 3A.

On connecting the mains supply to the panel the power LED indicator will light up – this is

located on the front cover (American Gas Safety Logo).

2. GAS SOLENOID VALVE OUTPUT

100-120V AC electrical power supplied from the [VALVE OUT] connector using a 3 core cable

can be connected to a gas solenoid valve which can shut the gas supply on alarm status.

Refer to your valve manual for more information and wiring!

3. SUPPLY & EXTRACT FAN PRESSURE DIFFERENTIAL SWITCHES / CURRENT MONITORS

These terminals are used to receive an input signal from external air pressure switches or

external current monitors. These terminals have factory fitted links installed.

If only one fan is being used – leave factory fitted links in terminals NOT IN USE!

1500S IOM Rev: 08

01-20

Merlin 1500S