Galvin Specialised CliniLever Lead Safe TM-BASXD Ürün Kurulum Manualline - Sayfa 4
Sıhhi Tesisat Ürünleri Galvin Specialised CliniLever Lead Safe TM-BASXD için çevrimiçi göz atın veya pdf Ürün Kurulum Manualline indirin. Galvin Specialised CliniLever Lead Safe TM-BASXD 5 sayfaları. Ss basin mixer
Sayfayı YazdırREMOVE & INSPECT FLOW REGULATING AERATOR
Supplied Tool
1. Remove Flow Regulating Aerator Housing
Using the supplied tool (pictured) remove the
flow regulating aerator housing as shown.
Ensure the flats on the outlet line up with the
flats on the tool and turn anti-clockwise.
3. Reassemble
Reverse steps 2 & 1 to reassemble ensuring correct orientation.
Test for leaks and correct operation
TROUBLESHOOTING
PROBLEM
Tap is leaking
Tap has inconsistent flow
Tap moves on basin
Water temperature is opposite to
the handle markings
2. Remove & Inspect
CAUSE
Headworks are worn or
damaged
Tap incorrectly installed
Blocked flow regulating aerator
Insufficiently tightened
Inlet hoses connected
incorrectly
th
Version 1, 14
April 2020, Page 4 of 5
Remove the housing and flow regulating
aerator.
Inspect for debris and clean. Replace if
necessary.
RECTIFICATION
Remove and inspect the headworks,
remove debris and/or replace parts if
damaged
Follow the installation steps above when
fitting the tap.
Follow the instructions above to remove
flow regulating aerator from the body and
check for debris. Install an inline strainer
to stop further blockages.
Follow the steps above in relation to
tightening the installation.
Connect the inlet hoses to the correct
inlets as shown above.
Flow Regulating
Aerator