Coram Showers 800 Hızlı Başlangıç Kılavuzu - Sayfa 6

Banyo Armatürleri Coram Showers 800 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Coram Showers 800 8 sayfaları. Shower enclosure

Sayfayı Yazdır

PN60517

PN60518

Important: Ensure that the coated side of the glass is on the inside of the door.

Attach the wheels to the doors: Adjuster wheels (PN60517) at the top and plunger wheels (PN60518) at the bottom.

Attach as shown and fix using the screw and screw cap (bottom 'plunger wheels' are shown as an example).

Inside

face of

door

a: Select the vertical seals with the 9mm flipper (PN40260), magnetic seals (PN80564) and trim to 1785mm.

Push fit trimmed 'flipper seals' onto the back edge of the doors. Ensure the flipper seal 'flaps' are on the outside of the doors.

b: Push fit 'magnetic seals' (PN80564) onto the closing edge of the doors (the same side as door handle).

Note: Ensure the magnetic seals are positioned as shown.

Note: Wetting the glass with water will help fit the seals.

PN60517

IMPORTANT

Ensure that the coated

side of the glass is on

the inside of the door.

PN60518

9mm

PN40260

PN80564

Inside

PN80564

Bottom 'plunger wheels' are shown as an example.

PN60518

Trim to

1785mm

Inside face

of door

Inside

face of

door

PN40260