Dynojet POWER COMMANDER FC Kurulum Talimatları - Sayfa 4

Motosiklet Aksesuarları Dynojet POWER COMMANDER FC için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Dynojet POWER COMMANDER FC 5 sayfaları. Fuel controller for yamaha zuma 125 2009; yamaha zuma 125 2010; yamaha zuma 125 2011; yamaha zuma 125 2012; yamaha zuma 125 2013; yamaha zuma 125 2014
Ayrıca Dynojet POWER COMMANDER FC için: Kurulum Talimatları (5 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları Kılavuzu (6 sayfalar)

Dynojet POWER COMMANDER FC Kurulum Talimatları
FIG.D
FIG.E
FIG.F
IFC22901.01
www.powercommander.com
Ground wire
4
5
6
7
8
9
10 Unplug the TPS from the throttle body.
Install the PCFC next to the battery (Fig. D).
Attach the ground wire from the PCFC to the negative side of the battery.
Route the PCFC harness towards the engine following the stock harness.
From the right side of the bike unplug the stock wiring harness (Fig. E).
The BLACK 4 pin connector is from the O2 sensor.
The BLACK 2 pin connector is from the injector.
Plug the harness from the PCFC in-line of the stock wiring harness.
Locate the Throttle Position Sensor on the left side of the throttle body (Fig. F)
This allows access to the harness.
2009-2014 Yamaha Zuma 125 - 4