Hiking DTS238-7 Manuel - Sayfa 5

Ölçüm Cihazları Hiking DTS238-7 için çevrimiçi göz atın veya pdf Manuel indirin. Hiking DTS238-7 15 sayfaları. Din rail , 3 phase wifi smart energy meter

Sayfayı Yazdır

(current wire bottom in and bottom output)

Transformer input type connection diagram

Noting: for CT input type connection , the power consumed display in register is not fact power consumed. The

fact power= the power display in register of meterX CTrate. For example , the power display in the register is 0.5

kWh and the CT is 800/5A, the fact power consumed=0.5 kWh X 160=80kWh

6.2 Installation

The meter can be installed on a35 mmDIN rail

6.2.1The meter can not installed and used until it is checked goods and sealed before delivery

6.2.2The meter should be install in the water proof box indoor or outdoor . the meter's box should be fixed on

strong and flame-resistant wall with a recommended height of about1.8 m, where there is no corrosive gas

around .

6.2.3The meter should be install fully in accordance with connection diagram on the terminal cover, it is better to

use copper as the leading wire for connection. All screws should be tightened.

6.2.4Diagram for installation dimension

7. Transportation and Storage

7.1 Heavy impact should be burdened to the products while transportation and unpacking.

7.2 The products should be stored in the original package and kept in place with temperature between-

40°+70°,the relative humidity less than 75% and no corrosive gas around .

7.3 Instorehouse , the meter should be placed on the shelf when kept in stock , there should not be more than 7

cartons piled up in vertical. Single-packed meters can not be piled up with more than 5 meters in vertical.

8. Warranty period

Within 12 months from the day of selling and provided that users operate correctly according to the requirement

of the user's manual , if the meter doesn't reach its technical specification. It can be repaired or replaced in free f

charge by the manufacturer .

9. Frame format