Gama Garden GLM-43E Kullanım Kılavuzu - Sayfa 6

Çim Biçme Makinesi Gama Garden GLM-43E için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Gama Garden GLM-43E 10 sayfaları.

.Check the supply cord before using the equipment,

if the rubber encloser of the supply cord has broken off or the metal conductor of it exposes to the air, replace the

supply cord immediately to avoid the risk of electrical shock.

3. Cables

.Please work with safety cables. For the connection only lines which are not lighter than rubber hose lines H07

RN-F with a minimum diameter of 3x1.5mm

.Plugs and couplings must be protected from splashes.

.Use a leakage-protective system(RCD)with a leakage current of no more than 30 mA

.Attach connection cable to traction relief. Make sure that in does not rub against edges. pointed or sharp objects.

Do not squeeze cable through door or window gaps

.Switching devices must not be removed or bridged (e. g. tying of switching lever to guide spar).

.Remove the plug from the socket

- whenever you leave the machine;;

-before clearing a blockage;

-before checking, cleaning or working on the machine;

-after striking a foreign object; inspect the appliance for damage and make repairs as necessary;

-if the appliance starts to vibrate abnormally (check immediately)

If the connection cable is damaged during use, it must be immediately disconnected from the main power supply

Do not touch the cable before it has been disconnected

from the mains power supply.

4. When mowing

. Only switch on motor when your feet are at a safe distance from the cutting tools.

. Do not tilt lawnmower when switching on the motor, except if the appliance has to be tilted for starting. In this

case, do not tilt it more than absolutely necessary and lift only the part which is away from the operator. Always

ensure that both hands are in the operating position before returning the appliance to the ground.

. Avoid operating the appliance in wet grass, where feasible.

.Adhere to the safety distance given by the guidance spars.

. Always be sure of your footing on slopes.

. Walk, never run.

. For wheeled rotary mowers, mow across the face of slopes, never up and down.

. Exercise extreme caution when changing direction on slopes.

. Do not mow excessively steep slopes.

. Use extreme caution when reversing or pulling the appliance towards you.

. Stop the blade(s) if the appliance has to be tilted for transportation when crossing surfaces other than grass, and

when transporting the appliance to and from the area to be mowed.

.Never operate the appliance with defective guards or shields, or without safety devices, for example deflectors

and/or grass catchers, in place.

Switch on the motor according to instructions and with feet well away from the blade(s).

Do not put hands or feet near or under rotating parts. For rotary mowers, keep clear of the discharge opening at all

times.

Never pick up or carry an appliance while the motor is running.

Pull the plug from the socket :

-before clearing blockages or unclogging chute;

-before checking, cleaning or working on the machine;

must be used. Do not exceed a maximum length of 25m.