HIKOB GATEWAY H-GW103A Kurulum Kılavuzu - Sayfa 11

Ağ Geçidi HIKOB GATEWAY H-GW103A için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HIKOB GATEWAY H-GW103A 11 sayfaları.
Ayrıca HIKOB GATEWAY H-GW103A için: Kurulum Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Installation Guide

INSTALL_GATEWAY-V5

2019/01 Edition

Plug this set up connector to the female Ethernet connector on the back of the GATEWAY.

4.3.2 GATEWAY arm's mounting process

The GATEWAY is delivered ready to be installed. HIKOB highly recommends using RAM

MOUNTS

products that can be optionally purchased with your GATEWAY, ask your vendor.

This is a set of 3 elements:

RAP-379U-M616

RAM-2461U

RAM-201U-B

Figure 4 – View of the GATEWAY attached on a pole with RAM mount joints

A first ball joint with a male screw that does the female thread on

any 4 holes of the GATEWAY casing.

A second ball joint, to be mounted on a wall or a pole. It can be

either screwed or attached with plastic clamps, or any method that

suits your environment constraints.

And the double socket arm allowing good adjustment.

Page 11