Adesys SVM8000-I Manuel - Sayfa 4

Modem Adesys SVM8000-I için çevrimiçi göz atın veya pdf Manuel indirin. Adesys SVM8000-I 18 sayfaları.

Sayfayı Yazdır

Adesys B.V. | Wateringen

Introduction

This manual covers the SVM module equipped with firmware version 1.0 and higher. The SVM is a

combination of 2G/4G Internet modem and SMS alarm dialler, and can be used to control and monitor

technical installations. The modem has a wide range of uses. For example, the SVM can help you connect

old installations based on a dialup modem connection to your SCADA system over the Internet.

1.1.

Variants

The SVM is available in multiple variants:

• the SVM with 4G modem without contact inputs (SVM0000-I);

• the SVM with 4G modem and 2 digital inputs (SVM2000-I);

• the SVM with 4G modem and 8 digital inputs (SVM8000-I).

1.2.

Features of the SVM-series

• Configurable delay times (models SVM2000-I and SVM8000-I only).

• Reporting of power failure without acceptance time delay.

• Periodic restart (reset) of the SVM (can be switched on and off).

• Serial interface RS-232 connection (9-pole D-sub).

• Ethernet interface UTP connection.

• Settings and SMS texts are permanently stored in the internal flash memory of the SVM (models

SVM2000-I and SVM8000-I only).

We recommend that you read the user manual carefully so that you can make optimal use of all SVM

options.

1.3.

Safety criteria

Before using the SVM, there are several criteria that the user should meet:

• The SVM should be installed in a controlled environment (for reasons of fire prevention);

• The SVM should be supplied with power using a SELV-type power supply;

• External Ethernet should not be connected directly to an SVM, but should be connected via an

overvoltage protection device;

• To reduce the probability of damage to the equipment, the SVM should be placed in an environment

protected against electrostatic discharge (ESD);

• The SVM is intended for use as a modem or alarm dialler. The SVM is not intended for use as part of a

critical safety system in a critical process.

1.4.

Checking the delivery

Check the packaging for damage. Contact your supplier immediately if the delivery is found to be

damaged or incomplete upon receipt.

The standard delivery includes:

• SVM module;

• Connection terminals;

• Ethernet cable;

• Quickstart SV-line.

Optional items include:

• Antenna and antenna cable (various models, including vandalism-proof antennas);

• Mains adapter 230VAC/12VDC (item number SV-20);

• RS-232, 9-pole D-sub cable male / female (item number TB-14);

• USB SERIAL adapter (item number TB-18).

1.5.

Environment

This product contains materials that can harm the environment. For the sake of the environment, if the

product has to be replaced at the end of its service life please do not dispose of it through the household

waste. Please return the device to your supplier or hand it over to a designated depot.

1.6.

Warranty and repair

Adésys performs a series of extensive tests on each SVM before dispatch. Adésys uses a warranty period

of 1 year.

Warranty claims are invalidated if:

• the defect is caused by gross negligence or inexpert installation;

• the device has been opened and/or repairs or modifications have been performed without the

permission of Adésys;

Manual SVM 4G modem | Back to

Index

Page 4