Corbin Russwin CL33600 Kurulum Talimatları Kılavuzu - Sayfa 10
Kilitler Corbin Russwin CL33600 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Corbin Russwin CL33600 16 sayfaları. Access 600 tcrne1 series cylindrical lockset
Sayfayı YazdırCL33600 Series Cylindrical Lock
11.
Connector Attachment (Interior PCB Assembly):
1. Connect P3 (2-pin connector) from lockbody
to J3 on module (Fig. 11).
2. Connect P4 (6-pin connector) from lockbody
to J4 on module (Fig. 11).
3. Connect ElectroLynx harness (4 and 8-pin)
from door harness to ElectroLynx harness
on interior PCB assembly (Fig 11).
NOTES:
Neatly fold the wires onto themselves and into the remaining
space to prevent pinching wires when mounting escutcheon.
Do not tuck extra mortise lockbody wires back inside the lock
body cylinder hole.
Connectors go on only one way.
Do not offset connector and be sure they are completely seated.
PCB Layout - Wire Assignments - ElectroLynx Assembly (Molex)
J2
1-Violet Lock Neg
(Solenoid, neg)
2-Gray Lock Pos
(Solenoid, pos)
12.
Outside Wire Positioning
Please follow these steps prior to installing
inside escutcheon to prevent any damage
caused by pinching wires:
a. Once wires are arranged, position piece
at a rotated angle against the door, under
earth ground wire.
b. Press piece against door unwhile turning
clockwise (Fig. 12a).
c. Twist into place, perpendicular with door
(Fig. 12b).
Copyright © 2009 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
J1
3-Pink
1- Black
N/A
PWR NEG
4-Tan
2-Red
N/A
PWR POS
From Reader
Board P5 to J5
3-White
5-Orange
7-Brown
DATA 1
RX (NO)
EGND
4-Green
6-Blue
8-Yellow
DATA 0
RX (COM)
LED
Rotate Clockwise
Fig. 12A
10
J5
Fig. 11
Inside of Door
Fig. 12B
J1
To ElectroLynx
Harness
J2