Corbin Russwin ASSA ABLOY Access M806 Programlama Talimatı - Sayfa 11

Kilitler tarafından Corbin Russwin ASSA ABLOY Access M806 için çevrimiçi göz atın veya pdf Programlama Talimatı indirin. Corbin Russwin ASSA ABLOY Access M806 16 sayfaları.

Sayfayı Yazdır
Access 800
Series
™
Locks
Keypad Programming Instructions
M801, M803, M804, M806 Programming
5
Enter a User Code and Card, Tag, FOB and RF FOB
99# Master Code or Supervisor Code*
50# (See Table Below)# (User Location 03-2000)#
User Code (1-6 digits)*
User Code (1-6 digits)*
Present Card, Tag, FOB or RF FOB
*
*
User Type Table:
0
1
3
4
5
7
8
9
Note 1: There is a time delay period between initially depressing the RF FOB
button and the actuation of the lock. In some cases the RF FOB will have to be
depressed (and held for 3 seconds) multiple times to successfully actuate the
lock.
Note 2: In the event that there are co-located RF Technology locks using
individual RF FOBs that are depressed simultaneously; the locks may not
actuate due to cross interference between the locks and the RF FOBs. The
"User" should repeatedly depress (and hold for 3 seconds) the RF FOB button
until actuation of the lock occurs.
Turn OFF Audible Beep verification on every Key Depression
99# Master Code*
30# 0# 0# (Off) (1# = On)
*
*
*
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2018-2019 Corbin Russwin, Inc., an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Passage User
Standard User
Lockout User
Extended Unlock User
One Time User
Emergency User
Communications Enable User
Panic User
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
BEEP / Yellow LED blinks
Yellow LED blinks slowly
Yellow LED goes out
Yellow LED blinks
Yellow LED blinks
Yellow LED blinks quickly
Yellow LED blinks slowly
Yellow LED goes out
11
(617417440) FM359 7/19