Dea TEO 700 Kullanım Talimatları ve Uyarılar - Sayfa 5
Kapı Açıcı Dea TEO 700 için çevrimiçi göz atın veya pdf Kullanım Talimatları ve Uyarılar indirin. Dea TEO 700 16 sayfaları. Sectional door electromechanical operator
Ayrıca Dea TEO 700 için: Kullanım Talimatları ve Uyarılar (20 sayfalar)
Sayfayı Yazdır
5 ELECTRICAL CONNECTIONS
Execute the wiring following the directions of the diagrams.
WARNING To ensure an appropriate level of electrical safety always keep the 230V power supply cables apart (minimum 4mm in the
open or 1 mm through insulation) from low voltage cables (motors power supply, controls, electric locks, aerial and auxiliary circuits
power supply), and fasten the latter with appropriate clamps near the terminal boards.
WARNING Connect to the power supply 230 V ~± 10% 50 Hz through a multi pole switch or a different device that can ensure multi pole
disconnection from the power supply, with a contact opening of 3 mm.
WARNING To connect the encoder to the control panel, use only a dedicated cable 3x0,22mm
PHOTO 1
N.O.
N.C.
RX
COM
TX
AC/24V
Wiring Diagram
START
uscita lampeggiante intermittente
intermittent flashing light output
sortie clignotant intermittente
Ausgang blinkend für Blinklampe
salida destellante intermitente
saída de luz intermitente
wyjście lampy ostrzegawczej świecenie przerywane
выход прерывистого проблескового фонаря
ROSSO
NERO
RED
BLACK
ROUGE
NOIRE
ROT
SCHWARZ
ROJO
NEGRO
VERMELHO
PRETO
CZERWONY
CZARNY
КРАСНЫЙ
ЧЁРНЫЙ
MOTOR
.
2
FLASH 24V
11