Mainlink MK-V0107 Kullanıcı Kılavuzu - Sayfa 11

Genişletici Mainlink MK-V0107 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Mainlink MK-V0107 12 sayfaları. Wireless hd video transmission

Sayfayı Yazdır
FAQ (frequently asked question)
Questions
OLED Output no
signal
Video can not be
recorded or
recorded
properly
Receiver
LED
Output
Input
Signal loss
版本：V3.0（2018.09）
Possible reason
●Unturned transmitter
●Abnormal
decode
transmitter, is closing down
●Receiver
channel
transmitter
channel
inconsistent
●IP address can not match with
transmitter
●Camera can not normally
connect to transmitter
●Transmitter has no source
input
●HDMI
connecting
source
to
transmitter
disturbed
●The compatibility problem of
transmitter and video source
●The receiver does not switch
corresponding program
●Abnormal signal of transmitter
Solution
●Check that whether the transmitter is
properly installed and powered on
●Close input video source, restart transmitter,
of
until signal of receiver is normal, then turn
on video source again
and
●Switch receiver channel to transmitter same
are
channel
●Please refer to the usage method to reset IP
address
●Check if the wire is loose, if any, using Ping
of transmitter (192.168.1.168) network cable
to test
●Please check the signal status of transmitter,
check HDMI interface again, at the
moment, check the camera
Video
●Replace HDMI connection between video
is
source and transmitter to the shielding
line.(recommended original accessories)
●Change another input source
●Each channel of receiver has two program,
press CH in short time switch corresponding
program
●Check that whether transmitter and the
第 9页