HIKOKI CM 12Y Taşıma Talimatları Kılavuzu - Sayfa 5
Öğütücü HIKOKI CM 12Y için çevrimiçi göz atın veya pdf Taşıma Talimatları Kılavuzu indirin. HIKOKI CM 12Y 20 sayfaları.
Sayfayı YazdırPRECAUTION ON USING DISC CUTTER
1. Never attach any tool except the diamond wheel or
cutting wheel as specifi ed by the manufacturer (see
optional accessories).
Do not operate the cutter while applying water.
2. Always check the diamond wheel before starting
the machine. If it is cracked, broken or bent, do not
use it. Carefully start the machine to check for other
abnormalities.
3. Using the diamond wheel to cut metal will shorten its
service life or will result in breakage. Never use the
diamond wheel to cut metal.
SPECIFICATIONS
Voltage (by areas)*
Power input
No-load speed
Dimensions of diamond wheel
Max. cutting depth
Weight (without cord and diamond wheel)
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Hose ............................................................................. 1
(2) Wrench ......................................................................... 1
(3) Protcetive glasses ........................................................ 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
(1) Diamond wheels for dry cutting (segment type)
Type
For concrete and masonry
For concrete and masonry
(For heavy duty)
For abrasive materials
(2) Cutting wheels
Type
Metal cutting wheel
Masonry cutting wheel
(3) Wheel washer (A) (hole diameter 25.4 mm)
Optional accesories are subject to change without notice.
APPLICATION
○ Cutting or scribing concrete
○ Cutting or scribing tile
○ Cutting or scribing stone
○ Cutting or scribing roof tile
○ Cutting steel
Wheel dia. (mm)
Code No.
305
Wheel dia. (mm)
Code No.
305
4. Start working only when maximum rotation speed is
reached.
5. Excessive force overloads the motor and reduces
working effi ciency and service life. Always cut concrete,
tile or stone with a cutting depth of 50 mm or less. If the
cutting depth is more than 50mm, cut the workpiece 2
or 3 times. If the workpiece is cut with a cutting depth of
more than 50 mm, the service life of the diamond wheel
will be reduced and the motor may seize.
6. Do not use this machine to cut asbestos.
7. In operations using a cutting wheel, if fl ame comes out,
cover the dust collection adapter with a rubber cap and
be sure to wear protective glasses.
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
2400 W*
5000 /min
Outer dia. 305 mm
Thickness 2.0 mm
Hole dia. 22.2 mm / 20 mm
100 mm
11.5 kg
Thickness (mm)
985618
2.8
312367
985619
3.0
Hole dia. (mm)
985609
22.2
985608
25.4
985611
22.2
985610
25.4
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a power receptacle while
the power switch is in the ON position, the power tool
will start operating immediately, which could cause a
serious accident.
English
Hole dia. (mm)
22.2
per pkg.
10 pcs.
5