Gamber Johnson TabCruzer 7160-0453-3 Kurulum Talimatları - Sayfa 2

Yerleştirme İstasyonu Gamber Johnson TabCruzer 7160-0453-3 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Gamber Johnson TabCruzer 7160-0453-3 2 sayfaları.

Sayfayı Yazdır
Installation:
1.
Install the TabCruzer using the supplied hardware to a mount per the instructions
provided with the mount.
2.
Connect a Mini USB cable to the Mini USB Jack on the back of the TabCruzer (Fig. 1).
3.
Connect the 3.5mm Audio Cable to the Audio Jack on the back of the TabCruzer (Fig.
1). Alternatly, FM transmitters, applified speakers or cassette adapters can also be
plugged into the TabCruzer.
4.
Route and restrain the cables using the provided cable ties (Fig. 1).
5.
Plug a Mfi approved USB car carger into a 12v accessory outlet and plug the USB Cable
into the USB car charger. Note: If using an ignition switched 12v accessory outlet, your
iPad will puase automatically when the vehicle is turned off.
6.
Install your iPad into the OtterBox Defender series case per the instructions included with
the case.
USE:
1.
Open the docking connector cover on the OtterBox Defender series case (Fig 2).
2.
Fully depress the Lock Button to open the TabCruzer
3.
Slide your iPad into the TabCruzer without seating it onto the docking connector
4.
Press down on the Slide of the TabCruzer to seat your iPad and close the dock. A click
will be heard when fully closed. Lock with key if desired.
5.
When the TabCruzer is powered, audio will not play through your iPad speakers.
6.
The USB Cable can be unplugged from the car charger for easy syncing with a personal
computer. Do not plug the USB Cable into vehicle or stereo USB jacks. Doing so may
damage the TabCruzer, your iPad or vehicle/stereo system.
Fig. 1 - Cable Tie Points
"Made for iPad" means that an electronic accessory has been designed to connect specifically to iPad and has
been certified by the developer to met Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. Please note the use of this
accessory with iPad may affect wireless performance.
Fig. 2 - Connector Flap Open