AireSpa ASWRB100 Kullanım ve Bakım Kılavuzu - Sayfa 16

Hava Temizleyici AireSpa ASWRB100 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu indirin. AireSpa ASWRB100 20 sayfaları.

Water tank empty

Refill tank using pitcher.

The three black dots in triangle form on the back wall of the large water tank are

water sensors. These sensors need to stay clean and free from debris. If sensors

are dirty, they may falsely trigger a WATER TANK EMPTY error.

Use ordinary tap water. If you wish to use purified water, mix half tap and half

purified.

Check the dam on the upper small reservoir.

Note: The dam may be loose allowing water to leak down into the large

water tank below. If the dam is loose and not holding the water in the small

tank, tightly push down to make sure the dam is closed.

Check the white round tube in the top left corner of the small reservoir

(There is a white piece that looks like a tower. On the bottom of that tower there

is a round tube like ring. That ring floats when there is water in the small reservoir.

The ring may be stuck or jammed from particles which inhibits the ring from

floating. If this ring does not float, it does not trigger the humidifier to work.

Energy saver mode

•

The AireSpa purifier has a 24 hour energy saver mode.

•

Once the 24 hour cycle is complete, the unit will automatically shut off.

•

You can always reset the timer by long pressing the All Off Button.

[See: Page 4, Diagram #5]

To order more supplies please go to:

HELPFUL HINTS

Please Close the Front Panel

AireSpa.com