AGT INDUSTRIAL AGT-B1000 Ürün Kılavuzu - Sayfa 13
Kaldırma Sistemleri AGT INDUSTRIAL AGT-B1000 için çevrimiçi göz atın veya pdf Ürün Kılavuzu indirin. AGT INDUSTRIAL AGT-B1000 19 sayfaları. Two-post auto lift
Sayfayı Yazdır5 .3 Risk of Vehicle Falling Off From The Lift
Note that when positioning the vehicle on the lift, incorrect center of gravity of the vehicle can
cause the vehicle falling off from the lift (Fig 14).
Important Note: Make sure that the front and rear of the vehicle need to be balanced
and the cables on both sides also need to be balanced. Do not board/step on the
vehicle or the lift when the lift is raised.
Below actions may cause the vehicle fall off from the lift (Fig 15)
6 - Maintenance
6.1 Every Month
Hydraulic System
1 . Check hydraulic oil level, fill hydraulic oil if necessary.
2 . Check the pump, hose and cylinder and see if there is hydraulic oil leaking.
6.2 Every 3 Month
Safety Maintenance
1. Check the condition of the safety lock and the wear of the stop block.
2. Check the anchor bolts, tighten nuts if necessary.
3 . Check if any nuts are loose, tighten nuts if necessary.
4 . Check if the arm locking system is working properly.
5 . Lubricate/grease all moving parts.
6 . Check the tension of the balance cables and check if there is any broken.
7. Check if the 2 carriage on both sides are at the same level.
6.3 Every 6 Month
Hydraulic Pump
1 . Check the condition and aging of the hydraulic fluid. Unqualified hydraulic fluid is the
main reason to cause valve failure and reduces the life of the gear pump.
2 . Check the noise variation of the motor and gear pump while normal operating.
6.4 Every 12 Month
1. Visually inspect all structural and mechanical parts to make sure there is no
abnormalities have occurred.
2 . Check and see if there is anything wrong with the motor, wiring, top limiter switch and
circuit breaker.
6. 5 Regular Lubrication
Use high quality grease to regularly lubricate all moving parts of this lift.
Fig 14 Risk of vehicle falling off
Fig 15 DO NOT do
Page 13 of 19