Deagostini Model Space HUMMER H1 Manuel - Sayfa 8

Oyuncak Deagostini Model Space HUMMER H1 için çevrimiçi göz atın veya pdf Manuel indirin. Deagostini Model Space HUMMER H1 18 sayfaları.

HUMMER H1: STEP BY STEP

9 9

Twist the servo horn from

side to side to help the

hole accommodate the

steering rod.

Wrap the steering rod

(Stage 46) in a strip of

paper towel or tissue to

protect it.

Carefully feed the rod

through so that the short

section of the rod that is

between two right-angles

is the only part within the

servo horn.

This is what the assembly should look

like from the front. Double check you

have all the parts correctly joined.

Keep twisting until the rod

is protruding through to

the other side of the servo

horn.

Your steering rod and servo

horn should look like this.

Check that you have each part

the right way round. The photo

is of the assembly from the rear.

212

Hold the steering rod

firmly in the needle-nose

pliers, then insert its tip

into the circled hole on

the servo horn, as shown.

Make sure you have the

correct end of the rod.

™