Airetool 720 Series Kullanım ve Servis Kılavuzu - Sayfa 3

Elektrikli Alet Airetool 720 Series için çevrimiçi göz atın veya pdf Kullanım ve Servis Kılavuzu indirin. Airetool 720 Series 12 sayfaları. Airetrol rolling motor

Sayfayı Yazdır

Safety Recommendations

FOR YOUR SAFETY AND THE SAFETY OF OTH-

ERS, READ AND UNDERSTAND THE SAFETY

RECOMMENDATIONS AND OPERATING IN-

STRUCTIONS BEFORE USING THIS TOOL.

For additional information on eye and face protec-

tion, refer to Federal OSHA Regulations, 29 Code of

federal regulations, Section 1910.133 Eye and Face

Protection, and American National Standards Insti-

tute, ANSI A87.1, Occupational and Educational Eye

and Face Protection Z87.1 is available from the Ameri-

can National Standards Institute, 11 West 42nd Street,

New York, NY 10036.

Hearing protectors are required in high noise areas,

85 dBA or greater. The operation of tools and equip-

ment in the area, reflective surfaces, process noises

and non-resonant structures can substantially con-

tribute to and increase the noise level in the area.

Excessive air pressure above 9o psig or worn motor

components can also increase sound level emitted

by tool. Proper hearing conversation measures, in-

cluding annual audiograms and training in the use

and fit of hearing protection devices may be neces-

sary.

Some individuals are susceptible to disorders of the

hands and arms when exposed to task which involve

highly repetitive motions or vibration. Those individu-

als predisposed to vasculatory or circulation problems

may be particularly susceptible. Cumulative trauma

disorders such as Carpal Tunnel Syndrome and Ten-

donitis can be caused by repetitions, forceful exer-

tions of the hands and arms. These disorders de-

velop gradually over periods of weeks, months and

years.

Tasks should be performed in such a manner

that the wrists are maintained in a neutral position

which is not flexed, hyperextended or turned side to

side.

Stressful postures should be avoided and can

be controlled through tool selection and work loca-

tion. Any user suffering from prolonged symptoms of

tingling, numbness, clumsiness or weakened grip,

nocturnal pain in the hand or any other disorder of

the shoulders, arms, wrists or fingers is advised to

consult with a physician. If it is determined that the

symptoms are job related or aggravated by move-

ments and postures dictated by the job design it may

be necessary for the employer to take steps to pre-

vent further occurrences. These steps might include,

but are not limited to repositioning the work piece or

redesigning the work station, reassigning workers to

other jobs, rotating jobs, altering work pace and/or

changing the type of tools used so as to minimize

stress on the operator. Some tasks may require more

than one type of tool to obtain the optimum operator/

tool/task relationship.