GAME ELF 412 in 1 Manuel - Sayfa 15

Oyun GAME ELF 412 in 1 için çevrimiçi göz atın veya pdf Manuel indirin. GAME ELF 412 in 1 18 sayfaları. Arcade game board

GAME ELF 412 in 1 Manuel
5.
Select "Return to main menu" to quit the setting menu after setting (as Figure 11),
and select "Exit game" to back game list (as figure 2). Restart the game, then new
settings are valid.
6.
Please go on to set other games if you need. If not, set System mode to "Normal
play" mode and save it. Re-enter the game list and the game will be started in
Normal mode.
7.2
Method 2 for Game configuration settings (Original configuration adjustments):
1.
Refer to Method 1, enter the game configuration editor menu(as figure 11), and
select the item "Enter Service Mode(if listed)" to enter game's original setting
menu (when some games select this item, it's need to quit game first and enter
again, then enter the game configuration setting menu).
2.
Follow the instructions of the game configuration setting menu to modify game
configuration and save it.
3.
After finishing it, press TEST or S1 to show the game configuration setting menu,
select "Exit game" and return to game list menu (as figure 2). Enter the game again
and the new configuration is valid. Caution: The game will enter setting menu
after starting if "Service mode"is set to ON.
Refer to Method 1,set "Service mode"to "OFF".
4.
Set the System Mode to "Game Mode" and enter the normal playing mode.

8. TEST OR S1 BUTTON FUNCTION

1.
System setting button, press TEST or S1 button to enter the system setting when
the screen show "Press TEST to setup" (as figure 3).
2.
In the Normal play mode, press TEST or S1 button to quit and return to the game
list (as figure 2). Or press and hold 1P-Start for 3~5seconds.
3.
In the Config/Edit mode, press TEST or S1 button in the game to pop up or hide the
configuration setting menu (as figure 11). Press S1 button on the game list menu
(as figure 2), and enter the Edit game list interface.

9. COMMON PROBLEMS AND SOLUTIONS

Problem: the game screen is not synchronised in the cga mode when game start.
Solution: Adjust the horiz. stabiliser in the game monitor until the image is clearly visible.
11