Maisi M20 Hızlı Başlangıç Kılavuzu - Sayfa 16
Video Kamera Maisi M20 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Maisi M20 17 sayfaları.
Sayfayı Yazdır
7 Frequently Asked Questions (FAQs)
Why won't the camera auto-start?
* Make sure if the power cable goes DC IN port on the top of the camcorder (not the USB port
on the right side of the device)
* Check if the Record Mode Setting is set to <Auto>.
* It could be the car charger design. Since there are so many brands of cars on market, so do
the car socket design. Our car charger may not be compatible with all car models. If our car
charger is not compatible with your car, you can contact us for further resolution on this.
What is the maximum allowed memory capacity for the camera?
While up to 64GB may be functional, we guarantee only up to 32GB micro SD Card "Class 10"
rating as the maximum allowed capacity for the moment.
How do I know the camera is recording?
You'll notice three changes when the camera is recording.
1) The second indicator on the left side of the camcorder will blinking blue.
2) The round dot icon on the top left of the display will flash red.
3) There is a counter on the top right of the display, and the numbers will be increasing
identifying how long the file has been recording.
Why my camera freezes a lot, and sometimes even not responding when the buttons
are pressed?
If the camera freezes, you can press the Reset button. In most cases, the freezes are related
to the card (compatibility etc.). You can try another SD card.
If the SD card is full with emergence files, the camcorder will freeze and will not start recording,
in some cased the buttons will refuse to response when pressing. If this is the case, please
format the SD card on your computer and then format it again on your camcorder.
You can contact us if the issue cannot be fixed at your end, we will seek possible firmware
update for you. If you received a faulty unit we can replace it for you.
Why only 10s footage is saved?
Please check if you have enable the motion detection. The motion detection function will
conflict with loop recording and resulting few seconds videos.
Why isn't the video/picture clear?
* Go to Resolution Setting and make sure you choose the highest resolution.
* Make sure the lens film is removed prior to use
* Make sure there are no fingerprints, dirt, or water on the lens, and clear the camera lens
using a piece of wet cloth on regular basis.
* Please use the players in the HD Player file for the playback. As per experience, sometimes,
the footage will be pixelated on Windows Media Player, but actually the recording is clear, it is
just the player issue.
Page 15 of 16