Maiwe MIEN2206 Kullanıcı Kılavuzu - Sayfa 10

Anahtar Maiwe MIEN2206 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Maiwe MIEN2206 14 sayfaları. Unmanaged industrial ethernet switch

MIEN2206 Unmanaged Industrial Ethernet Switch

LINK/ACT

（Green）

3.2. Hardware Installation

For most industrial applications, it is very convenient to install with 35mm

standard DIN rail. When you remove the device from the packing box, the DIN

rail connection seat should be fixed on the rear panel of the MIEN2206 series

switch. If MIEN2206 series switches need to be mounted on DIN rail, you

should check the installation of DIN rail before installation. It includes the

following two contents:

Whether the DIN rail is fixed and strong, whether other equipment is

installed on the DIN rail, and whether there is enough space for installing the

switch.

Weather Is there any power supply suitable for the work of this switch on

the DIN rail.

After selecting the installation location of the switch, install the switch on

the DIN rail as follows:

Insert the upper part of the DIN rail into the snap groove of the upper part

of the DIN rail connection seat with a snap spring. Push down slightly on the

top panel of the switch and rotate the device as shown in below

Off

10M working state (10Base-T)

The port has established a valid network

connection

Blinking

Network activity on the port

The port doesn't establish a valid network

Off

connection

Install MIEN2206 series switches to Dil-rail

- 6 -