HIKVISION D0T Kullanıcı Kılavuzu - Sayfa 6

Güvenlik Kamerası HIKVISION D0T için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HIKVISION D0T 15 sayfaları. Audio turret camera
Ayrıca HIKVISION D0T için: Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (17 sayfalar)

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are



required to fix the camera. For wooden

wall/ceiling, self-tapping screws are required.

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Rotation Position

[0° to 360°]

1). Loosen the trim ring to adjust the pan position

[0° to 360°].

2). Loosen screw A to adjust the tilt position [0° to

180°].

3). Loosen screw B to adjust the rotation position [0°

to 360°].

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole on the ceiling

according to the drill template.

Figure 2-4 Drill Template of Junction Box

3. Take apart the junction box, and align the screw

holes of the camera with those on the Junction

box's cover.

4. Attach the camera on the junction box's cover with

supplied screws.

Figure 2-5 Attach the Camera on the Junction Box's

Figure 2-3 3-Axis Adjustment

Cover

Pan Position

[0° to 360°]

Trim Ring

Tilt Position

[0° to 180°]

Screw A

Screw B