Majacraft Aura Talimatlar Kılavuzu - Sayfa 5

Dönen Tekerlekler Majacraft Aura için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Majacraft Aura 16 sayfaları.

We recommend you insert the two screws in the hinge

holes closest to the outside edge of pedal. This keeps

the pedal still and aligned while you put in the remaining

screws.

4. Drive Wheel

Required:

Drive Wheel assembly

1 - Star Washer (in the hardware bag)

1 - Wooden Nut (wrapped separately)

Make sure the wooden nut has been removed from the drive axle. Check that the star washer is on the drive

axle - if not, then slide the star washer on. The black bushes must be in place on the front and back of the

Stem/Handle assembly

Fit the drive wheel to the base assembly. Slide the drive shaft through the black bushes in the Stem/Handle

assembly from the back to the front. Screw the wooden nut on to the drive axle and tighten it firmly.

Fit the pedals using the twelve gold 25mm screws provided.

Match the holes in the hinges with the holes at the front of

the base. The long side of each pedal goes nearest to the

central base.

majacraft