Majacraft Little Gem Talimatlar Kılavuzu - Sayfa 4
Dönen Tekerlekler Majacraft Little Gem için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Majacraft Little Gem 8 sayfaları.
3. Move the stem to upright position
Required:
Base/Stem assembly
Turn the Base/Stem assembly upside down. Take
care when doing this to support the pedals because
they can fall on to the edge of the drive wheel and
dent the wood. Find the silver slider knob and slide
it toward the centre of the stem (slide it out of the
locked position).
Rotate the Base/Stem assembly round so you are
looking at the front of the wheel. Push the slider knob
away from the centre of the stem to lock the stem
into the upright position.
In the other pocket will be the flyer and bobbins.
2d
Now turn the Base/Stem assembly the right way up and
rotate the spine assembly into the upright position. It
will stop against the small metal bracket.
3c
4
All the components can
now be arranged ready for
assembly.
2e
majacraft
3a
3b
3d