Majacraft Pioneer Montaj Talimatları - Sayfa 9

Dönen Tekerlekler Majacraft Pioneer için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Majacraft Pioneer 11 sayfaları.

9. Bobbin, Flyer and Scotch Tension

Required:

1 - Bobbin

1 - Flyer

1 - Tension knob, spring and string assembly

EXTRA

If you are not certain of the connection arrangement, here is a

full description. Place the wheel directly in front of you so you are

looking at the crank assembly attached to the drive wheel. The

rubber joiner that is on the conrod/footman that is closest to you

goes into the hole in the pedal on your left. The joiner on the conrod

that is furthest from you goes into the hole in the pedal that is on

your right.

If you have some petroleum jelly or vaseline, rub a

small smear onto the flyer shaft. This has already

been done at the factory so is not essential.

majacraft