Gree XK47 Kullanıcı El Kitabı - Sayfa 14

Kontrolör Gree XK47 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gree XK47 19 sayfaları. Wired controller

3.10 Blow Setting

Blow function: After the unit is turned off, the water in evaporator of indoor unit will be

automatically evaporated to avoid mildew.

In the Cooling or Dry mode, press Function till the unit enters the Blow setting status and then

press Enter/Cancel to active this function.

When the Blow function is activated, press Function to the Blow setting status and then press

Enter/Cancel to cancel this function.

Blow function setting is as shown in Fig.3.10.1

Notes:

W hen the Blow function is activated, if turning off the unit by pressing On/Off or by the

① .

remote controller, the indoor fan will run at the low fan speed for 2 min, with "BLOW" displayed on

the LCD. While, if the Blow function is deactivated, the indoor fan will be turned off directly.

B low function is unavailable in the Fan or Heating mode.

② .

Fig.3.10.1 Blow Setting

Wired Controller XK41 & XK47