Majestic 36MCUFD SERIES Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 11

Kapalı Şömine Majestic 36MCUFD SERIES için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Majestic 36MCUFD SERIES 20 sayfaları. Unvented vent-free fireboxes

Sayfayı Yazdır
When finishing a custom cabinet, mantel, or other built-in enclosure,
the opening size to accommodate the fireplace with trim installed is
as follows:
36MCUFD
with Trim
K
4"
1
J
8
/
"
8
1. Bend out the nailing flanges located on each side of the firebox.
2. Slide the firebox into prepared framing or position firebox in its final position and frame later.
3. Level the firebox by checking the top edge of the firebox. Shim if necessary.
4. Anchor firebox to the side framing members using 8d nails or other suitable fasteners. See Figure 14.
5. The canopy must be installed for safe operation of the heater. See page 13 for canopy installation details.
Nail Sides
Through Nailing
Flanges
26D4750
MCUF42
with Trim
47
/
"
4
1
8
/
"
8
the fireplace must be installed giving
full consideration to the clearance and
height requirements identified in this
manual.
Figure 14 - Location of Nailing Flanges
FIREPLACE FRAMING
K
Figure 13 - Custom Cabinet
J
11