DEBEZT I-988M3 Kullanıcı Kılavuzu - Sayfa 6
GPS DEBEZT I-988M3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DEBEZT I-988M3 12 sayfaları. Gps tracking system
Sayfayı Yazdır
send to the primary mobile phone number two SMS text messages: Alert!
Abnormal start detected.the latitude and longitude . The device will also send
the same message to the web base enquiry portal by GPRS signal.
C. Abnormal vehicle movement
In the case if there is notable vibration detected and the vehicle is moving for
more than 30 seconds, the red indicator will be flashing if the device is in
activation mode. The device will send to the primary mobile phone number two
SMS text messages: Alert! Abnormal movement detected.the latitude and
longitude . The device will also send the same message to the web base enquiry
portal by GPRS signal
4.12 SOS emergency call by SMS text message/GPRS
By pressing the "SOS" button located at the side of the device or the "SOS"
button connected with the device socket wire for two seconds, the device red
indicator will be flashing. Immediately after that, the device will send to second and
third registered mobile phone number two SMS text messages: Emergency, please
check. the latitude and longitude. The device will also send the same message to
the web base enquiry portal by GPRS signal.
Remark: After pressing the "SOS" button to call for help, the user will
have to wait until the device has completely sent the previous "SOS"
alert text message before he can make the second "SOS" emergency
call, otherwise the "SOS" call will not be validated.
4.13 Region-fencing warning
The setting for region-fencing must be done through marking the pre-determined
region at the online map integrated with the web base enquiry portal. Once the region
is determined and the vehicle is driving in/out of the pre-determined region, the
device will send to the primary telephone number a SMS text message:Vehicle
moved outside the monitoring region. the latitude and longitude. The device will
also send the send message to the web base enquiry portal by GPRS signal.
Remark: The region-fencing can only be determined or cancelled
through the web base enquiry portal. Region-fencing will remain
function until it is being deactivated. (Please deactivate the function if
region-fencing is not required, this will help save the SIM card's SMS
text message cost).
- 8 -
4.14 Speeding alert
The speeding limit can be determined through the web base enquiry portal.
When the vehicle is travelling above the pre-determined speed limit, the device will
send to the primary mobile phone number a SMS text message: Vehicles Speeding.
the latitude and longitude . The device will also send the same message to the web
base enquiry portal by GPRS signal.
Remark: The speeding alert can only be activated/deactivated through
the web base enquiry portal. Speeding alert will remain function until it
is being deactivated. (Please deactivate the function if speed alert is
not required, this will help save the SIM card's SMS text message cost.)
4.15 Power level alert through SMS text message
When the remaining battery power level is lesser than 20%, the device will
send to the primary mobile phone number a SMS text message: Power level is less
than 20%, pls recharge battery. If the remaining battery power level is lesser than
10%, the device will send to the primary mobile phone number a SMS text message:
Power consumption less than 10%, must recharge battery now.
4.16 Email Alarm Function
After the users setting the email alarm function on monitoring platform
throught computer,all the alarm message from the device will sent to the
appointment email address.(Please reference the operation manual page18,
email alarm setting)
4.17 Function of Remote Flameout
When a vehicle is abnormal and gives an alarm, the user can start the function
of remote flameout for the vehicle by monitoring platform, and the vehicle will
automatically shut down engine.
Flameout Settings: In the operation menu of platform, click "Engine Flameout" to
pop up the settings interface. After entering password and confirming, click the
Enable key to start the remote flameout for the vehicles. After that, the vehicle will
automatically shut down engine (After setting successfully, the platform will display
the information of Remote Flameout Has Been Set for Vehicle).
Cancel Flameout: In the operation menu of platform, click "Cancel Engine
Flameout" to pop up the settings interface,input the password of device and confirm
this operation.
- 9 -