DeBug ADB400 Kılavuz ve Güvenlik Talimatları - Sayfa 4
Tekerlekli Sandalye DeBug ADB400 için çevrimiçi göz atın veya pdf Kılavuz ve Güvenlik Talimatları indirin. DeBug ADB400 5 sayfaları. Beach wheelchair
Sayfayı Yazdır
4
ASSEMBLY COMPONENTS
1/4"-20 x 1-1/4" S.S. HEX BOLT
2 EACH FOR BACKREST OR
OPTIONAL 1/4" QUICK
RELEASE PIN
5/16"-18 x 2-1/4" S.S. HEX BOLT
1 EACH FOR REAR SUSPENSION
OR 6/16" QUICK RELEASE
PIN OPTION
ASSEMBLING INSTRUCTIONS
1. Slide on the leg support sling, and install
the two 5/16"-18 adjustment knobs
2. Slide on the foot plate, and tighten the leg
rest adjustment knobs
3. Install the mid axle, tighten the two
attaching 1/4"-20 bolts
4. To install the backrest, slide the backrest
down on the chair frame and attach using
the two 1/4"-20 bolts
5. The rear suspension may be attached by
inserting the rear suspension tension bolt.
This bolt should be tight during use.
Click
REMOVABLE ARMREST
OPTIONAL DRINK HOLDER
1/4"-20 x 2-1/2" S.S. HEX BOLT
2 EACH FOR MAIN AXLE
here
to view a video on assembling the DeBug Beach Wheelchair
5/16"-18tp x 2-1/4" SS REAR
LEG REST
ADJUSTMENT KNOBS
BACKREST BOLT (2 EACH)
1/4"-20tp x 2-1/2" SS MAIN
DISASSEMBLING INSTRUCTIONS
1. Loosen the leg length adjustment knobs
and slide out the footplate
2. Slide off the leg support sling by removing
the two 5/16"-18 adjustment knobs
3. To remove the mid axle, loosen the two
attaching 1/4"-20 bolts
4. To remove the backrest, remove the two
attaching 1/4"-20 bolts and slide up on
the backrest
5. The rear suspension may be detached by
removing the rear suspension tension bolt.
This bolt should be tight during use
5/16" LEG REST
SUSPENSION BOLT
ADJUSTMENT KNOB (2 EACH)
1/4"-20tp x 1-1/4" SS
1" SS MAIN AXLE FLAT
WASHER (2 EACH)
1/8" SS MAIN AXLE
AXLE BOLT (2 EACH)
HITCH PIN (2 EACH)