BriskHeat DHCSR Series Kullanım Kılavuzu - Sayfa 5

Isıtıcı BriskHeat DHCSR Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. BriskHeat DHCSR Series 8 sayfaları. Drum / pail heaters

INSTALLATION OF HEATER

1. Verify drum surface is clean, free of weld splatter, and not damaged

in anyway.

2. Select a suitable location on the drum, below the lowest expected

content level. For almost all applications, the heater should be mounted

on the bottom 1/3 of the drum.

3. Wrap the heater around the drum. Extend the spring attached to the

metal tab; latch the spring loop onto the hook on the opposite side as

shown in Figure 1.

4. Verify there are no air gaps between the heater and the drum.

Do not use metal tab as a handhold when extending the

spring.

The heater MUST make continuous contact with the drum.

Do not overlap the drum heater onto itself or another heater

Figure 1

BriskHeat

Silicone Rubber Band Drum / Pail Heaters