Gree FLEXX Series Kurulum Kılavuzu - Sayfa 13

Hava Kontrol Cihazları Gree FLEXX Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Gree FLEXX Series 19 sayfaları. A coils

A stable connection is required between the coil and the blower to prevent

dumping.

Based upon the actual conditions, if coil is installed as Fig (A), the coil should be

concealed in a specific room or space and make sure the coil is not accessible to the

general public.

Based upon the actual conditions, if coil is installed as Fig (B), make sure that there

is enough space for care and maintenance. And the coil is not accessible to the general

public.

Based upon the actual conditions, Multi-Position A-Coils come factory installed

with a vertical and horizontal drain pans and can be configured for upflow or horizontal

pull-through installations.

When the coil matches blower, the side which is nearby from coil is NOT allowed to

install electric heater kit. Recommended configuring is as shown below.

(a) Standard Application: Left hand shown / Right hand similar (not shown)

(b) Counter flow: Right hand shown / Left hand similar (not shown)

(d) Downward flow

(A)

(a)

(B)

A-Coil