AIRFIX A20005 Talimatlar Kılavuzu - Sayfa 4

Motor AIRFIX A20005 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. AIRFIX A20005 16 sayfaları. Jet engine

Assembly sequence 58

Assembly sequence 59

Assembly sequence 60

jet engine

Assemble the engine turbine/

compressor blades unit into the

outer engine casing half.

Assemble the inner engine casing

half onto the outer engine casing

half aligning the screw holes.

Note: The inner casing half has a

locating lug to ensure correct

positioning into the inner engine

nacelle half.

Secure the two engine casing

halves with four screws, and at this

stage check that the fan blades spin

freely by blowing on them.

NOTE: If they do not spin freely, it is

because the fan blades have been

fitted too tightly together on the

spindle, so remove the casing and

gently ease the fan blades further

apart.

Blades must have "end float" when

in position.

Locate the push button into the top

cover with the cut-out positioned

to the top of the push button

Locate the switch unit over the top

of the push button and secure the

switch with two screws

Overview of the switch and button

assembly secured inside the top

cover

Assembly sequence 1

Assembly sequence 2

Assembly sequence 3