BriskHeat GCW Series Kullanım Kılavuzu - Sayfa 3
Yiyecek Isıtıcı BriskHeat GCW Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. BriskHeat GCW Series 5 sayfaları. Gas cylinder warmers
Sayfayı Yazdır
Gas Cylinder Warmer (GCW & HCW Series)
SPECIFICATIONS
Operating conditions:
Operating Ambient Temperature Range:
Temperature Range maintained on Bottom of Cylinder:
Temperature Range maintained on Top of Cylinder:
Self-Regulating Grounded Heating Element
Up to 150 Watts
Oil and Some Chemical Resistance
GCW Series: Ordinary Locations
HCW Series: CSA Class I Division I Groups C & D
Part Drawing
2"
(51mm)
4
BriskHeat
30
o
F-95
o
F (-1
o
90
o
F-130
o
F (32
80
o
F-120
o
F (27
120 or 240 Volts Models
Water Resistance
Both Indoor and Outdoor Use
®
Corporation. All rights reserved.
OPERATION INSTRUCTIONS
C – 35
o
C)
o
C – 54
o
C)
Read and understand this entire
o
C – 49
o
C)
manual before operating this gas
cylinder warmer.
STEP 1
Remove heater from box. Make visual
inspection of heater. Do not use if
torn or damaged.
STEP 2
Gas cylinder should be placed on
a clean, dry surface. 2A.) Open
VELCRO
closure on heater and
®
position around cylinder with the
power lead exit on the bottom of
the heater. 2B.) Heater should be
positioned on cylinder such that it is
covering the cylinder from the fl oor
to the top of the cylinder. 2C.) Attach
VELCRO
closure so heater is tight
®
against the cylinder with no sagging
or bundling. Cover any valves on top
of cylinder with optional insulating
blanket. (sold separately)
2A.)
Gas Cylinder Warmer (GCW & HCW Series)
VOLTAGE:
120VAC; 240VAC
STEP 3
compliance)
Terminate power cord to appropriate
electrical power supply. The power
cord consists of three color-coded
conductors, black, white, and non-
insulated. The black wire should be
connected to incoming hot line. The
white wire should be connected
to the neutral (for 120V) or power
return (for 240V). The non-insulated
wire should be connected to earth
ground. The power connections must
be adequately rated to electrically
support the voltage and amperage
of the heater. Follow all local
electrical codes for proper electrical
connections.
2B.)
BriskHeat
®
Corporation. All rights reserved.
(see page 3 for electrical
2C.)
5