Bristan Artisan Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 5

Sıhhi Tesisat Ürünleri Bristan Artisan için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım Kılavuzu indirin. Bristan Artisan 9 sayfaları. Sink mixer
Ayrıca Bristan Artisan için: Montaj Talimatları (2 sayfalar)

Sayfayı Yazdır

Bristan Artisan Kurulum Talimatları ve Kullanım Kılavuzu

Installation Requirements

IMPORTANT - - - - PLEASE READ

IMPORTANT

PLEASE READ

This/these fitting/fittings needs/need to be installed in accordance with the following

Installation Requirements and Notes (IRN) to ensure they meet the requirements of the

Water Supply (Water Fittings) Regulations 1999 and the Scottish Byelaws 2004.

IRN

IRN R001

IRN

R001

See text of entry for Installation Requirements or Notes.

IRN R006

IRN

R006

IRN

R006

This tap or combination tap assembly has a Type AUK3 air gap and is therefore for installation

in any premises to protect against a backflow risk up to a Fluid Category 5.

IRN R010

IRN

R010

Water supplies shall be a reasonably balanced pressures from a common source (e.g. hot and

cold supplies both from the same storage or both from a supply pipe). Where the fitting is

supplied from unbalanced supplies (e.g. hot and cold supplies from separate sources) a

'Listed' single check valve or some other no less effective backflow prevention device shall

'Listed' single check valve

be fitted immediately upstream of both hot and cold water inlets.