Majestic SDB 3219 Manuel - Sayfa 10
MP3 Çalar Majestic SDB 3219 için çevrimiçi göz atın veya pdf Manuel indirin. Majestic SDB 3219 16 sayfaları.
8
ON/OFF switch
9
microUSB port
10 Phone jack
11 Clip
Tracks insertion by computer
This player uses a microSD card.
When the unit is OFF insert a microSD card in the slot on the side of the unit, then connect the MP3
player to the USB port of your PC, by using supplied USB cable.
After windows have installed the player you will find it under computer as removable USB.
Copy your files from the computer into this MP3 player.
When transfer is complete you can disconnect the unit from PC and remove the USB cable.
Note: during computer connection the battery will be charged.
MUSIC
Push power switch to ON state, music playback will start automatically.
At the end of the last track playback will start again from the beginning. During track playback the blue
LED will blink.
During playback it is possible to press PLAY key to pause. When playback is pause press PLAY again
to start playback from the point it was stopped.
When the player is pause the blue LED will be on, the device paused will automatically switch to
standby mode after 60 seconds (to turn on again it is necessary to press PLAY for about 3 seconds)
After turn on if there is no microSD card inserted the blue LED will blink fast and it will turn off
automatically.
Stand by: when playing music, long press PLAY key for 3 seconds to enter standby mode. In standby
mode press PLAY key again for about 3 seconds to turn on the unit.
Songs changing: during playback press PRE/NEXT keys to switch to previous or next track.
Fast forward and rewind: long press PRE/NEXT keys during playback to rewind/fast forward inside the
track. During fast forward and rewind the blue LED will blink fast.
Volume adjustment: during playback press VOL+ key to increase the volume (when max level is
reached the player will emit a sound); press VOL- key to decrease the volume.
Battery charging
The player has a built-in rechargeable battery which can be charged by using USB cable connecting to
PC.
When the battery is empty the unit will emit a quick sound and red LED will blink.
To charge the unit turn on the PC and connect to it by using the supplied USB cable. The player should
charge completely in about 4 hours (the charging time depends on the battery charging status).
Jack 3.5mm to insert earphones.
10