Majestic concert vibraphone Montaj Talimatları Kılavuzu - Sayfa 3
Müzik Enstrümanı Majestic concert vibraphone için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Majestic concert vibraphone 8 sayfaları.
Sayfayı YazdırFrame Set Up & Resonator Attachment
琴架、琴框、共鳴管組裝
1
Connect curved braces to cross bar with hand knob. Do not tighten.
將圓弧形支撐架與方形連結桿以旋鈕結合，但請勿鎖緊。
Marimba & Xylophone
立奏低音 / 高音木琴
2
Identify low end leg assembly. With leg assemblies
lying flat with the height adjustment crank handle on
the floor and the crossbar receivers facing up, the low
end leg will have the wheel with brake on the left.
For xylophone and marimba, insert one end of the
crossbar into receiver (A), and an end of the curved
brace into receiver (B). Tighten hand knob at position
(B) first, then the other hand knobs at position (A) &
(C).
For vibraphone, insert one end of the crossbar
into receiver (B), and an end of the curved brace
into receiver (A). Pedal brackets should be on the
underside of the crossbar with the pedal facing toward
the player (wheel with brake) side of the instrument.
Pull rods should protrude on the top side of the pedal.
Tighten hand knobs at positions (A)&(C) first, then the
hand knob at position (B).
將低音側琴架平放， 再將連結桿組件插入琴架 (A) 位置，
圓弧形支撐架插入琴架 (B) 位置；先確保 (B) 處旋鈕可
鎖入圓弧形支撐架孔內，再將 (A) 處與 (C) 處旋鈕鎖緊
固定。
For Vibraphone, tighten hand knobs at position (A)
& (C) first ; then hand knob at position (B).
室內型立奏顫音鋁琴則需先確保 (A) 處與 (C) 處
旋鈕可鎖入孔內，再將 (B) 處旋鈕鎖緊固定。
Vibraphone
立奏顫音鋁琴
C
Marimba &
Xylophone
室內型立奏低音 /
高音木琴
Vibraphone
室內型立奏顫音鋁琴
P3
A
B