Aguilar AGRO Kullanıcı El Kitabı - Sayfa 3

Müzik Pedalı Aguilar AGRO için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Aguilar AGRO 4 sayfaları.

Sayfayı Yazdır

II. Features and Functions

A. Front Panel Features

Contour

: broad range mid scoop @ 1kHz

(ccw=max scoop (~20dB) cw=flat)

Treble

: + 6dB/- 10dB @ 4kHz shelving

Mid

: + 4dB/- 10dB @ 600Hz peaking

Bass

: + 8dB/- 6dB @ 40Hz shelving

Deep

: +6dB <100Hz shelving

Presence

: + 6dB/-20dB >4kHz shelving

Engage

switch: When this switch is pushed in the AGRO saturation effect

is active. When the switch is in the out position, the effect will be

bypassed. When the effect is on, the

is off, the LED will not be lit.

B. Rear Panel Features

Input: A second ¼" input jack is provided on the rear panel for your

convenience. The rear panel input jack disconnects the front panel jack

when you insert a cable.

Outputs: Two ¼" outputs are provided.

Outpu 2

and

level, controlled by the switch to its right. When the switch is in the out

Output 2

position

is instrument level. You should select the output level appropriate for your

application. For instance – line level signals are typically used directly into

a power amp. Instrument level signals are typically run into a preamp,

the input of a bass head, or in an FX loop. Modern mixing consoles are

set up to accommodate a wide range of signals. Both outputs are

buffered and may be used at the same time.

Footswitch: The footswitch that comes with your AGRO allows you to

turn the effect on and off without using the

the unit. When the effect is on, the

off, the LED will not be lit, and the effect will be bypassed.

DC In Jack: This is a standard 2.1mm DC jack. The center terminal

polarity is positive. Input: 24V 0.5A regulated DC.

Power Switch: The "-" symbol is on, and "o" is off.

on the right is selectable for either line level or instrument

is line level, and when the switch is pushed in

Operate

LED is lit. When the effect

Output 1

on the left is line level

Engage

button on the front of

Operate

LED is lit. When the effect is

Output 2