Majestic Appliances MJ-9200W Kullanıcı El Kitabı - Sayfa 5

Yıkayıcı Majestic Appliances MJ-9200W için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Majestic Appliances MJ-9200W 19 sayfaları. Separate/stacking washer
Ayrıca Majestic Appliances MJ-9200W için: Kurulum Kılavuzu (6 sayfalar), Kullanıcı El Kitabı (20 sayfalar)

Sayfayı Yazdır
Installing/Removing

Getting things ready to install

your appliance

Unpacking, Inspecting, Electricity, Closets/Alcoves,
Plumbing, Venting
Unpacking
•
Check the shipped appliance for shipping damage. It is your responsibility
to register any damage with the freight company delivering the product.
•
Remove the strapping, then slide the cardboard surround off the machine.
Re≠move the foam protecting material and the plastic bag.
•
Write down the serial number from the box or the back of the machine.
•
Destroy the carton, plastic bags and foam parts after appliance has been
unpacked.
•
Children should never be left alone or unattended in the area where
appliances being unpacked.
•
If you have any doubts, do not use the appliance and call on a qualified
technician.
REMOVING THE FOAM DRUM SUPPORT
REPLACING THE METAL BOTTOM PAN.
EXTRA CARE HAS BEEN TAKEN TO PREVENT SHIPPING
DAMAGE. MAJESTIC IS THE ONLY COMPANY WHO SHIPS THEIR
APPLIANCES WITH A DRUM SUPPORT TO REDUCE TRANSIT
DAMAGE. THE FOAM DRUM SUPPORT MUST BE REMOVED. HERE
WE DEMONSTRATE HOW TO ACCOMPLISH THIS.
SHIPPING
BOLTS MUST
REMAIN IN
Carefully tip the unit
MACHINE
from front to back mak-
DURING THIS
ing sure it can't tip all the
PROCESS!
way over.
Tip the unit the other
direction from the back
and remove the leveling
legs totally
Remove the foam drum
support.
Slide the bottom pan so
that the front slots in the
pan fit over the feet of
the leveling legs.
Page 5
Majestic LLC © 01/01/2006
With the unit tipped
back, loosen the leveling
legs a few turns.
Replace the rear leveling
legs and tighten them
down securely.
OWNER RESPONSIBLE
FOR DAMAGE RESULTING
FROM TIPPING MACHINE
AFTER REMOVING
SHIPPING BOLTS. AVOID
TIPPING MACHINE
FORWARD AFTER
SHIPPING BOLTS ARE
REMOVED
Go to the front of the
machine and retighten
the leveling legs and you
are done.