IKEA ENHET Kurulum Kılavuzu - Sayfa 14

İç Mekan Mobilyaları IKEA ENHET için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. IKEA ENHET 16 sayfaları. Kitchen
Ayrıca IKEA ENHET için: Kurulum Kılavuzu (10 sayfalar), Kurulum Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Building a kitchen island

When it comes to building a kitchen island, it is

important to consider some key aspects during the

planning and installation. Since the kitchen island will

not be supported by the walls, the frames need to be

attached to the floor to prevent the island from tipping

over or moving around. For ENHET, you can build a

kitchen island using the open frames along with the

assembly kit for kitchen island.

Start by deciding where the island will be positioned.

We recommend that you leave 120cm between the

island and the other kithen units to ensure a good

workflow in the kitchen.

Once you have positioned the frames, add some

temporary tape underneath each leg and mark the

perimeter of each leg sleeve accurately, since this

will be the final location of your kitchen island.

Measure and resize the benchtop if needed. As you

place it on top of the island, make sure your have an

equal overhang all around. Then, attach it using the

brackets provided with your base unit.

For a straight island that aligns with the rest

of the kitchen, use reference points in the room,

for example base cabinets.

Use the anchoring metal brackets included in the

assembly kit for kitchen island to secure the kitchen

island to the floor.

Before fixing the island to the floor, assess

your floor and make sure the fixation points

of the island do not conflict with floor heating,

or electrical lines located underneath the floor.

Fixing devices for the floor are not included

since different floor materials require different

types of fixing devices. For advice on suitable

fixing devices for your floor, contact your local

specialised dealer.

Make sure you assemble the cabinet stabilisers onto

the frames according to the assembly instructions

that come with the assembly kit for kitchen island.

After you have positioned the legs in the anchoring

fittings, connect all frames using the connectors

included with the frames. We recommend that you

use a large spirit level to check that the cabinets are

level in all directions. To make minor adjustments,

adjust the height of the legs.