Bristan 1500 Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 9

Banyo Armatürleri Bristan 1500 için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım Kılavuzu indirin. Bristan 1500 16 sayfaları. Thermostatic power shower

Sayfayı Yazdır

Bristan 1500 Kurulum Talimatları ve Kullanım Kılavuzu

Fitting the Riser Rail

1. Mark the position

Position the assembled riser rail on the wall, bearing in mind the

different heights of people likely to use the shower and the length of

the hose when connected to the shower.

With the riser rail vertical, mark the wall bracket positions onto the

wall.

Release the slider handle and remove the slider and wall brackets

from the rail.

2. Attach wall brackets

Position the wall bracket fixings in the marked positions against the

wall, ensure they are vertically in line with each other and mark the

centres of the fixing holes onto the wall.

Warning: Please check for any hidden pipes and cables before

drilling holes in the wall.

Drill suitable holes and insert the wall plugs. Securely attach the

wall bracket fixings to the wall using the screws.

Tips: A piece of insulation or masking tape positioned where

holes are to be drilled and before marking out the exact position

for the fixing holes will help stop the drill bit from wandering,

particularly on a tiled surface.

When working near a basin, bath or shower insert plug or cover

waste to prevent losing small parts.

Take care not to drop tools/equipment into basin, bath or

shower during shower installation.

Note: If replacing an existing riser rail, check to see if the existing

holes can be reused or covered by the new wall brackets. Try to

avoid drilling close to the edge of tiles, drill in the middle of the tiles

or in the tile joints.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisors.

Wall bracket

Slider

handle

Wall bracket

fixing