Bristan IRSD1-BN Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 7
Dağıtıcı Bristan IRSD1-BN için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım Kılavuzu indirin. Bristan IRSD1-BN 16 sayfaları. Infrared automatic soap dispensor
Ayrıca Bristan IRSD1-BN için: Kurulum Talimatları ve Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Installation -
4. Attach Pump to Bottle
Ensure the dispenser tube is located
inside the bottle and push the pump down
firmly onto the bottle until a loud 'click' is
heard.
To remove the pump from the bottle press
the release button in on the side of the
pump and pull the pump from the bottle.
5. Connect Sensor Cable and Dispenser
Cable
Connect the sensor cable from the spout
to the sensor cable on the pump. Push
the two connections together and tighten
the connecting ring to ensure the two
connections are locked together.
Connect the dispening cable from the
spout into the top connection on the
pump.
Push the threaded connection of the
dispensing cable into the connection on
the pump and tighten the nut ensuring it
is fully tightened.
A suitable spanner may be used to tighten
the nut.
6. Place Pump into Bracket
The pump has a cut out section which the
wall bracket slots into.
cont.
Pump
Dispenser
Tube
Dispenser
Cable
Bottle
Power
Cables
Senser
Cables
7